You mount a shelf, load it up — and months later it sags, creaks, and lets you down.
You drill into the wall, fix up a shelf bracket, pile on tools or kitchen kit — and within a few months the coating flakes, the spring weakens, and the bracket droops under load. These stainless steel folding wall brackets are made throughout from brushed 304 stainless steel with no paint and no spring mechanism. A long press of the lever folds the bracket flat against the wall in seconds; push it back up and it locks solid at 90°. A pair supports up to 250 kg and stays completely rigid throughout.
Benefits
- No more replacing brackets every year: Cheap painted brackets rust, flake and lose their spring — with 304 stainless steel construction there is no rebuying and no redrilling.
- Your wall space comes back instantly: One press of the lever and the bracket lies flat — your garage, kitchen, bathroom or balcony wall is fully cleared without any dismantling.
- No doubt when loading up: The friction-glide hinge locks at 90° without a spring and holds securely after thousands of fold cycles — nothing droops, nothing creaks, nothing collapses unexpectedly under load.
Specifications
- Material: 304 stainless steel, brushed, uncoated
- Available sizes: 20 cm, 25 cm, 30 cm, 35 cm
- Colour options: Silver, White, Black
- Weight per bracket: approx. 0.37–0.60 kg (depending on size)
- Load capacity: up to 250 kg per pair (when fixed into wall studs)
- Package contents: 2 folding brackets + stainless steel screws & wall plugs
- Hinge type: Friction-glide system, springless
- Fold angle: folds in at 20°, locks at 90°
How to Use
- Mark: Locate wall studs — both brackets must be anchored into timber studs behind the wall to achieve full load capacity.
- Fix: Insert the supplied stainless steel screws and wall plugs — no additional tools or materials needed.
- Load: Place a shelf board across the open bracket arms, load it up — to fold away simply press the long lever and the wall is free.
Pro Tip: Choose the bracket length to match your shelf depth — the arm length should roughly equal the depth of the shelf board so the weight is evenly distributed and the hinge is not loaded unevenly on one side.