The cable is stuck and won't go through the pipe bend.
Anyone who has ever tried to pull a cable through a winding pipe knows the frustrating snag at every bend. The universal cable pulling tool made of three-layer spring steel pushes through tight curves, right-angled turns, and long pipe runs where stiff pulling aids fail. The result: cable laid, pipe pulled through, job done.
Advantages
- No more getting stuck at pipe bends: Thanks to the 360° bending capability of the spring steel, the tool moves through every angle without needing to be pulled out and repositioned.
- Pull multiple cables at once: The flat head with a generous opening holds several cables simultaneously, eliminating multiple runs and significantly reducing installation time.
- No worries about material breakage on long runs: The three-layer spring steel withstands high restoring forces, so you don’t have to fear the tool kinking or breaking before the run is complete.
Specifications
- Material: Three-layer robust spring steel
- Wire diameter: 4 mm
- Available lengths: 5 m (16.4 ft) / 10 m (32.8 ft)
- Head variants: Double flat head or flat head + pulley head
- Scope of delivery: 1× Universal cable pulling tool
Usage
- Prepare: Choose the desired length and head variant, attach or hook the cable to the flat head.
- Insert: Insert the tool into the pipe and push forward evenly – the spring steel automatically follows all bends.
- Pull through: Catch the cable at the other end and pull it together with the tool through the pipe until fully laid.
Pro tip: For very long or heavily curved pipe runs, rotate the tool slightly while pushing – this allows the spring steel to overcome even tight 90° bends effortlessly.